U0023: Barramento de comunicação CAN de baixa velocidade — (+) alto
O que fazer
Everything probably still works, and this is the one fault in this group that should not wait.
Here is why. This part of your car's network can run on one wire if the other fails, so when one gets shorted to battery voltage the car simply abandons it and carries on. You notice nothing.
But the voltage is still there. It is sitting on a wire bundled with the one still in use, and connected to every computer on that network. The safety net hid the fault; it did not remove the damaging condition — and every day it stays is another day of it.
So unlike the rest of this family, get this one looked at promptly even though nothing has stopped working.
The cause is nearly always something fitted after the car was built — a tracker, dashcam, alarm, stereo, light bar or tow bar. A live feed tapped next to the network wires, or a self-stripping connector clipped onto the wrong one, causes most of these. Say what has been fitted, including by a previous owner; unplugging it and re-testing is quicker than any measurement.
And be prepared for the repair to have two stages — see U0005.
O que este código significa
The positive line of the low speed data bus is being held high. See U0005 for the warning that matters most — battery voltage on a bus wire can damage every transceiver on the network, so the repair may have two stages.
And here that warning has a sharper edge, because of what U0019 explains about this network.
A fault-tolerant bus responds to a wire shorted to power by abandoning it and running on the other. So the vehicle keeps working — while battery voltage sits on a conductor that is bundled with the one still in use, and connected to every module on the network.
The redundancy hides the fault. It does not remove the voltage.
Which makes this the one code in the low speed family that should not be left running on its reserve. A break can wait for a convenient appointment. A short to power is applying a damaging condition continuously, and every day it remains is another day of it.
So the instruction differs from the rest of this family: have this one seen promptly even though nothing has stopped working.
And the cause is nearly always something added — a live feed tapped beside the pair, a self-stripping connector on the wrong wire, a screw through a loom. Unplugging an accessory and re-testing is quicker than any measurement.
Causas prováveis
Comece aqui
- Emenda de fiação malfeita em instalação de terceiros · moderado
- Fiação em curto com a tensão · moderado
- Instalação de alarme ou imobilizador de terceiros com defeito · moderado
- Fiação do barramento de dados danificada · moderado
Menos comum
- Chicote elétrico danificado · moderado
- Infiltração de água no conector · moderado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre U0023.