Naar de inhoud

P0B00 Hoog Generiek / SAE

P0B00: Motor van de elektrische of hulptransmissieoliepomp — stroom fase U

WhatsApp Telegram X E-mail

Wat te doen

The tell for this whole family is when it misbehaves: fine on the move, awkward from a standstill. If stop-start has quietly stopped working, or the car hesitates or thumps as it pulls away from rest, mention it — that pattern points here and a road test alone will miss it. The car disabling stop-start or electric driving is the cheap outcome; it is protecting the gearbox. Do not have it "coded out" to make the warning go away. Ask whether the pump's supply is high voltage on this model before anyone opens anything.

Wat deze code betekent

The current in one phase of the auxiliary transmission fluid pump's motor is wrong. This is the first code of the P0Bxx range, and the pump it names exists for a reason worth understanding before any of the rest makes sense.

A conventional automatic gearbox gets its pressure from the engine. The fluid pump is driven through the torque converter, so pressure exists whenever the crankshaft turns — and the design quietly assumes the engine never stops while the car is in gear. A hybrid breaks that assumption at every set of traffic lights. The engine shuts down at rest, and during electric driving it may not run at all, yet the transmission still needs line pressure to hold its clutches applied and to be ready to move the instant the driver asks. So a second pump is fitted, driven by an electric motor rather than by the engine, and its whole job is to maintain pressure in the moments the engine is off.

That gives every code in this family its diagnostic signature: the fault is invisible while the engine is running. With the crankshaft turning, the main pump supplies everything and the car behaves perfectly. The symptoms appear only at the moments the auxiliary pump was supposed to cover — a delayed or harsh engagement pulling away from a stop, stop-start declining to work, electric-only driving refused. A driver reports "it only does it at the lights", and a road test with the engine running finds nothing at all.

The motor is three-phase, and the argument for that is already written at P0A5D: three identical circuits that must agree, four suspects when one stops matching, and a measurement that sorts them. One thing differs here and it matters for safety. The traction motor's phases are unambiguously high voltage; this pump's supply depends on the design — some are driven from the traction pack, others from a 12-volt or 48-volt rail. Establish which before anything is touched, and treat it as high voltage until you have.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0B00.