U0085: Communicatiebus van het voertuig F — (−) onderbroken
Wat te doen
Expect equipment on the converted part of the vehicle to have stopped working. Everything at U0082 applies — including the free test: does the fault change as the vehicle is loaded, or as the body is moved?
Two things are worth asking for when the break is found.
Ask for the second wire to be inspected along the same stretch. On a working vehicle the damage is usually mechanical — a strap, a load, a stone, or a flex point — rather than slow corrosion, and whatever crushed or cut one wire almost certainly reached the other. A vehicle that earns its living cannot afford to come back for the second half.
And if the break is where the wiring flexes between the chassis and the body, ask for the joint to be placed outside the flexing section and properly supported. A repair made in the middle of a flex point is a future failure — it costs nothing to do it properly at the time, and a great deal to do it twice.
Go back to whoever converted the vehicle; that wiring is theirs.
Wat deze code betekent
The negative line of vehicle communication bus F is open circuit. Everything at U0082 applies — the join between chassis and body wiring, the flex point between them, the underbody exposure, and the free test of loading the vehicle or cycling the body.
U0006's instruction is the one to carry: inspect the partner conductor along the same length wherever a break is found, and replace a damaged section rather than splicing one wire.
On a working vehicle that instruction has extra force, because the damage is usually mechanical and localised — a strap, a load, a stone, a flex point — rather than the slow corrosion that takes one conductor at a time in a cabin. Whatever crushed or cut one wire almost certainly reached the other, and a vehicle that earns its living cannot afford to come back.
And where the loom crosses a flex point, the repair should restore the strain relief as well as the conductor. A splice at a flexing point is a future failure, and moving the joint out of the flex zone costs nothing at the time and everything later.
Waarschijnlijke oorzaken
Begin hier
- Bedrading van de databus beschadigd · gemiddeld
- Kabelboom beschadigd · gemiddeld
- Slechte lasverbinding in een naderhand aangebrachte installatie · gemiddeld
- Gecorrodeerde of losse stekker · eenvoudig
Minder vaak
- Fysieke schade door opspattend materiaal van de weg · gemiddeld
- Busafsluitweerstand defect · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over U0085.