P2620: Saída da posição da borboleta — circuito aberto
O que fazer
The engine will respond to the accelerator exactly as normal. The problem shows up in the gearbox: changes at the wrong moments, hunting between gears, and most obviously kickdown that no longer works — flooring the pedal gives you a responsive engine and no downshift.
That combination is the important thing to report, because it points away from the transmission itself. The engine module knows exactly where the throttle is — it is proving that every time you accelerate — and the fault is that the message is not reaching the transmission module. A transmission that is stripped, rebuilt or replaced on the strength of this will behave identically afterwards. Ask for the wiring between the two modules to be checked, and for the transmission module's own view of throttle position to be compared with the engine module's on a scan tool. That takes minutes and settles it.
O que este código significa
An open circuit on the output by which the engine module passes throttle position to another module.
The same inversion as the rest of this family — this is a signal being sent, not read — and the same exoneration follows: the throttle position sensor, the throttle body and the accelerator pedal are all working, because the module had a value to pass on.
What receives it is almost always the transmission, and that makes the symptom specific and recognisable. An automatic transmission decides when to change gear largely from how far the throttle is open and how quickly it moved: a light throttle asks for an early, gentle upshift; a sudden wide opening asks for a downshift and a hard hold. Take that information away and the transmission is left guessing.
So the presenting complaint is a gearbox one, and it is worth recognising because it gets gearboxes stripped. Shifts happen at the wrong points, the transmission hunts between gears, and — the clearest single sign — kickdown stops working: flooring the pedal produces a willing engine and no downshift, because the module that would have ordered the downshift never learned the pedal moved.
The cheapest thing anyone can do with this code is notice that the engine responds perfectly to the throttle while the transmission behaves as though it does not. That gap is the diagnosis.
Causas prováveis
Comece aqui
- Circuito aberto na fiação do sensor · moderado
- Conector corroído ou frouxo · fácil
- Chicote elétrico danificado · moderado
Menos comum
- Entrada do módulo receptor com defeito · especializado
- Módulo da transmissão com defeito · especializado
Rara
- Módulo do motor com defeito · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P2620.