C0048: Wegsensor des Bremskraftverstärkers
Was zu tun ist
The brakes work, but the pedal may be harder than usual — on cars with an electric brake booster, considerably harder, because the assistance can drop back to a mechanical fallback. Test the pedal gently before setting off, leave more room, and get it looked at promptly.
Was dieser Code bedeutet
The brake booster travel sensor circuit has a fault.
This sensor measures how far the booster's internal pushrod has moved, which is not the same as how far the pedal has moved.
The difference is the point. Comparing pedal travel against booster travel tells the module whether the booster is actually following the driver — a gap between the two is assistance failing in real time, detectable before the driver feels a hard pedal.
On an electrically boosted system it does more than monitor: it closes the loop. There is no vacuum diaphragm following the pedal mechanically; a motor is asked to produce assistance and this sensor reports what it produced. Losing it can force the system into a fallback where the driver's foot does all the work.
The most important thing first: the car still stops.
ABS, traction control and stability control are all additions to a braking system that works without them. When the module finds a fault it switches itself off and hands back a conventional, fully hydraulic brake system — the pedal, the master cylinder, the lines and the calipers are untouched. You have not lost your brakes.
What you have lost is the help. Without ABS the wheels can lock under hard braking, which lengthens the stopping distance on a slippery surface and — the part people forget — takes away your ability to steer while braking hard, because a locked wheel cannot generate cornering force. Without stability control the car will not catch a slide for you.
So drive it, but drive it as though it were forty years old: brake earlier, leave more room, and be especially careful in rain, snow and on gravel.
Wahrscheinliche Ursachen
Hier anfangen
- Wegsensor des Bremskraftverstärkers defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
- Kabelbaum beschädigt · Fachwerkstatt
Seltener
- Membran des Bremskraftverstärkers undicht · Fachwerkstatt
- ESP-Steuergerät defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu C0048.