Zum Inhalt springen

P014B Mittel Generisch / SAE

P014B: Lambdasonde — Verzögerte Reaktion von mager nach fett, Bank 2 Sensor 2

WhatsApp Telegram X E-Mail

Was zu tun ist

Ask how many of these delayed-response faults are stored across both banks. If several are, the sensors are probably fine and something shared is at fault — four delayed sensors is a fuelling problem, not four failed parts, and that is worth establishing before any are replaced.

Ask whether the evaporative purge valve has been checked. One stuck open lets fuel vapour into the engine at unexpected moments and produces exactly this pattern across all the sensors.

Mention any smell of fuel, which would support that.

The car will usually drive normally, so plan the repair around your MOT rather than treating it as urgent.

Was dieser Code bedeutet

The downstream oxygen sensor on bank 2 is not beginning its lean-to-rich transition when it should.

This is the bank 2 counterpart of P013F, and it completes the set of four downstream delayed-response codes. With all four available, the pattern across them is genuinely diagnostic and worth reading before anything is removed.

  • One direction on one bank — that sensor, or that bank's exhaust.
  • Both directions on one bank — a leak or a transport problem on that side.
  • One direction on both banks — something shared and directional, such as a purge valve or the fuel itself.
  • All four — a fuelling or strategy fault rather than the sensors.

The bottom row is the one that saves money. Four delayed downstream sensors are not four failed sensors — they are an engine whose mixture is not doing what the module believes it is doing, and the sensors are reporting that faithfully.

An evaporative purge valve stuck open is a classic producer of that pattern. It admits fuel vapour to the intake at moments the module has not accounted for, so the real mixture transitions late relative to the commanded one — on every sensor at once.

Where the fault is genuinely confined to this sensor, the ordinary causes apply: an exhaust leak on this bank, a sensor not seated to depth, a cracked body admitting reference air, or honest age.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community

Schreiben Sie den ersten Erfahrungsbericht dazu

Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.

Was einen Bericht lesenswert macht:

  • Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
  • Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
  • Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P014B.