U0039: Kommunikationsbus des Fahrzeugs B — (+) unterbrochen
Was zu tun ist
Expect a group of systems to have stopped working together. One broken wire does this — see U0030.
Two things worth asking for.
Has the garage established which of the car's networks this is? It is identified only by a letter, and the familiar test at the diagnostic socket checks a different one.
And be aware that a normal resistance reading does not necessarily clear the wiring here. The network has a terminator at each end, so where the break falls changes what the meter shows — a break past the last computer can read completely normal. That is not a reason to distrust the test; it is a reason to know the layout before relying on it.
When the break is found, ask for the second wire to be inspected along the same stretch — they run twisted together, so whatever damaged one was touching the other.
Mention accident repair, accessory installations, and any signs of rodents.
Was dieser Code bedeutet
The positive line of vehicle communication bus B is open circuit. See U0003 for what an open does to a differential pair, U0028 for identifying the network before measuring it, and U0030 for the procedure in order.
One thing follows from U0037's topology argument and is worth knowing when the resistance reads high.
The two terminators sit at the physical ends of the backbone. So where the break falls decides what the meter shows: a break in the middle leaves each half with one terminator and reads about double the normal value from either side, while a break beyond the last module still leaves both terminators connected and may read entirely normal.
Which means a correct resistance reading does not clear the wiring on a network whose shape is unknown. It narrows where the break can be, and that is genuinely useful — but only once the topology is known.
Otherwise the general list applies, and U0006's instruction to inspect the partner conductor wherever a break is found.
Wahrscheinliche Ursachen
Hier anfangen
- Datenbusleitungen beschädigt · mittel
- Korrodierter oder loser Stecker · einfach
- Busabschlusswiderstand defekt · Fachwerkstatt
- Kabelbaum beschädigt · mittel
Seltener
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0039.