U0050: Kommunikationsbus des Fahrzeugs C — (+) hoch
Was zu tun ist
This is one of the faults that can damage things rather than just stopping them, and on this network the things are expensive.
Full battery voltage has got onto a network wire, and every unit on that network is connected to it — which here usually means the stereo, the amplifier and the navigation unit. Many of those are coded to your car, so a damaged one cannot simply be replaced with a second-hand part.
So be prepared for a repair in two stages, and do not keep using the system until the short has been found — the voltage is still there, still stressing whatever survived it.
The cause is nearly always an added power feed. A stereo, amplifier, subwoofer, tracker or dashcam installation, where a live wire was tapped next to the network wires or a self-stripping connector was clipped onto the wrong one in a bundle.
Say what has been fitted, including by a previous owner, and ask for it to be unplugged and the car re-tested first. That is quicker than any measurement.
Was dieser Code bedeutet
The positive line of vehicle communication bus C is being held high. See U0005 for the module-damage warning — battery voltage on a bus wire can destroy the transceiver in every module on that network, so the repair may have two stages.
On an entertainment network that warning has a particular cost worth knowing, because the modules concerned are expensive and often tied to the vehicle.
A head unit, an amplifier and a navigation module are among the pricier units on a vehicle, and many of them are coded to the vehicle or to its immobiliser — so a damaged one is not simply replaced with a used part. See U0184 and U0334.
Which makes the two-stage warning more than a caution about the bill. It is a reason to find the short before running the system again, because voltage left on the pair continues to stress whatever survived the first exposure.
The cause is nearly always an added power feed — a live tapped beside the bus pair, a self-stripping connector on the wrong wire in a bundle, or a screw through a loom while mounting an amplifier or a bracket.
Wahrscheinliche Ursachen
Hier anfangen
Seltener
- Fehlerhafter Einbau von Alarmanlage oder Wegfahrsperre · mittel
- Kabelbaum beschädigt · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0050.