Zum Inhalt springen

U0211 Gering Generisch / SAE

U0211: Kommunikationsverlust mit dem Sitzsteuergerät D

WhatsApp Telegram X E-Mail

Was zu tun ist

The car drives normally; one seat's powered adjustment has stopped.

The most useful thing to establish first, and it takes one scan: are the other seats also reporting faults? On vehicles with individually powered seats they often share a local network. If several are silent, the fault is in what they share rather than in the seats. If only one is, the problem is on that seat's own wiring — which is a much smaller job.

Its wiring is the likeliest cause. A seat that slides, reclines and has a powered legrest flexes its loom over a long travel every time it is used, and the loom sits under the seat where luggage and feet reach it.

If a replacement module is proposed, ask two things: whether it needs coding to the vehicle — on a car like yours it almost certainly does, and one fitted without coding behaves exactly like a faulty one — and accept that stored seat memory positions will be lost and need setting up again.

Was dieser Code bedeutet

The fourth seat control module has stopped being heard from. See U0208 for the family's framing and U0210 for the rear-seat considerations.

Four seat modules means every seat in the vehicle is individually powered, which places it among luxury saloons, large SUVs and MPVs with individual rear seating. The relevant consequence is not electrical but architectural: on vehicles like these the seats are frequently on their own local subnet rather than directly on the body bus.

That matters because it changes what a fault means. Where the seats hang off a local link bridged by one of their number or by a nearby module, a fault in the bridge silences all of them — so several seat codes together point at the link or its master rather than at four failed modules. One seat silent while the others work proves the shared link is healthy and narrows the fault to that seat's own branch, which is a genuinely useful thing to establish before removing anything.

The other feature these vehicles bring is per-occupant memory tied to keys and profiles, which raises the coding point from U0209 to a near-certainty: a replacement module will almost always need configuring to the vehicle, and stored positions are lost regardless.

Physically, the same causes dominate as everywhere in this group — the under-seat loom, its connectors, and moisture — with the addition that individual rear seats on rails or with powered legrests flex their wiring over a much greater travel than a fixed bench ever does.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community

Schreiben Sie den ersten Erfahrungsbericht dazu

Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.

Was einen Bericht lesenswert macht:

  • Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
  • Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
  • Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0211.