Saltar al contenido

El contenido de referencia se muestra en inglés mientras se escribe su traducción.

Sensor de presión del cárter

Measures pressure inside the crankcase directly, which catches far more than a sensor that only checks whether the breather hose is plugged in. A healthy engine runs its crankcase at a slight depression — a little below atmospheric — and that is what stops blow-by gas pushing oil out through the seals.

Watching that pressure detects several faults that otherwise have no sensor of their own: a blocked breather or oil separator, which lets pressure build; a torn separator diaphragm, which lets the intake pull far too hard; a split or disconnected hose, which brings the crankcase to atmospheric. And, over time, worn piston rings — because blow-by rises as an engine wears, and this sensor measures blow-by directly. It is one of the few sensors that gives early warning of engine wear rather than of a component failing.

The cheap sanity check is at rest: with the engine off the crankcase must be at atmospheric, and this sensor must agree with the barometric sensor.

It sits in oil mist by definition, since it measures the space oil vapour lives in — so oil wicking along the wires into its connector is its characteristic fault, and finding the source matters as much as cleaning the connector.

También conocido como: crankcase vent pressure sensor, ccp sensor, blow-by pressure sensor, crankcase vacuum sensor

Referenciado por 14 códigos

WhatsApp Telegram X Correo electrónico

Códigos que involucran este componente (14)

Otros componentes en Air Intake and Metering

Información, no instrucciones

CarGeek es una obra de referencia, no un manual de taller. Sus páginas se escriben a partir de fuentes públicas y de lo que otras personas han comprobado, nunca a partir de la documentación de servicio del fabricante, de modo que pueden ser incorrectas o incompletas para su vehículo concreto. Parte de lo que describen entraña un riesgo real: alta tensión, combustible a presión, energía acumulada y piezas calientes o en movimiento.

Antes de actuar sobre cualquier indicación, hágala verificar por una persona con formación técnica siguiendo el procedimiento propio del fabricante para su vehículo. Nada de lo que hay aquí sustituye ese procedimiento.

Trabajando en este componente

Sé el primero en documentarlo

Todavía no se ha publicado nada sobre esto. Todo lo que haya encontrado vale la pena anotarlo — incluso un callejón sin salida le ahorra a alguien esa misma tarde.

Lo que hace que valga la pena leerlo:

  • El coche — marca, modelo, año y motor. La misma avería se comporta distinto en cada uno.
  • Lo que mediste, no solo lo que cambiaste.
  • Qué lo solucionó de verdad — o que nada lo hizo, que también conviene saber.

Iniciar sesión o crear una cuenta para agregar lo que encontró sobre Sensor de presión del cárter.