Aller au contenu

P04DB Modérée Générique / SAE

P04DB: Système de ventilation de carter débranché

WhatsApp Telegram X E-mail

Que faire

Ask for the breather hoses to be physically inspected, not just the code read. These hoses go brittle with age and split or snap out of sight under the manifold, which reads the same as being disconnected.

Mention any oil leaks, oil consumption, or a smell of oil, and any whistling or sucking noise from the engine bay — all of which fit this fault.

If anyone has previously fitted an oil catch can or removed part of the breather system, say so. That is what this check is designed to detect, and it is an MOT and emissions problem as well as a fault code.

Do not leave it. With the crankcase not being ventilated, pressure builds and pushes oil past the crankshaft seals — which turns a hose repair into a much larger one.

Ce que signifie ce code

The crankcase ventilation system has been detected as disconnected.

Blow-by is unavoidable: some combustion gas always escapes past the piston rings into the crankcase. Left there it would pressurise the engine, push oil out of every seal, and contaminate the oil with fuel and acids. So it is drawn back into the intake and burned — which is what crankcase ventilation is for, and why venting it to atmosphere has been illegal for decades.

This code exists because a disconnected breather hose is both a common failure and a common modification, and manufacturers now detect it deliberately.

A disconnected hose does three things at once:

  • It vents oil vapour to atmosphere, which is the emissions offence and an MOT concern.
  • It admits unmetered air to the intake if the disconnection is on the intake side, so the mixture goes lean and fuel trim codes follow.
  • It stops the crankcase being evacuated, so pressure rises and pushes oil past the crankshaft seals — which is how a detached hose becomes an oil leak and, eventually, a seal replacement.

Check the hose physically rather than trusting the code. These hoses become brittle with heat and age and split along their length or snap at the elbow, often out of sight underneath the manifold, and a split reads the same as a disconnection.

A hose that popped off was pushed off by pressure, so look for a blocked breather or oil separator as the underlying cause.

Causes probables

Commencez ici

Moins fréquent

Symptômes

Composants concernés

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P04DB.