U0086: Bus de communication du véhicule F — (−) bas
Que faire
Expect equipment on the converted part of the vehicle to have stopped or to be misbehaving, and probably worse when the equipment is running.
That load-related pattern is the clue, and there is a one-minute test that confirms it.
Ask for the voltage between the vehicle body and the chassis to be measured while the body equipment is running. A good bonding shows a few tens of millivolts. A corroded one shows whole volts — and volts between two parts of a vehicle that should be at exactly the same potential is the fault, stated as plainly as it can be.
That is far simpler and more decisive than tracing network wiring, and it should be the first thing done on a converted vehicle with this code.
The cause is the earth strap between body and chassis — the connection that carries everything the body equipment draws, living under the vehicle in the salt. It is accessible and cheap, which is the best combination there is.
Say whether the problem is worse when the equipment is working, since that is what points here.
Ce que signifie ce code
The negative line of vehicle communication bus F is being held low. Everything at U0083 applies, including that the body-to-chassis earth strap is the commonest single cause on this kind of vehicle and should be inspected before the bus pair is traced.
One addition belongs to this conductor: it is the one nearest the earth wiring, so a degraded body earth reaches it first — which is why the U0083 signature of a fault that follows load rather than movement shows up here most clearly.
And there is a check that separates the two possibilities in a minute. Measure the voltage between the body structure and the chassis with the body equipment running. A healthy bonding shows a few tens of millivolts. A corroded one shows volts — and volts between two parts of a vehicle that should be at the same potential is the fault, stated directly.
That is a simpler and more decisive test than tracing a network, and it is the one to ask for first on a converted vehicle showing this code.
Causes probables
Commencez ici
- Connexion de masse corrodée · modérée
- Câblage en court-circuit à la masse · modérée
- Épissure de câblage médiocre dans une installation non d'origine · modérée
- Câblage du bus de données endommagé · modérée
Moins fréquent
- Infiltration d'eau dans le connecteur · modérée
- Défaut de câblage intermittent · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0086.