Aller au contenu

U0126 Modérée Générique / SAE

U0126: Perte de communication avec le module du capteur d'angle de braquage

WhatsApp Telegram X E-mail

Que faire

Expect a stability control warning, with the car otherwise driving normally and the reduced protection described at U0122.

Before anything else, say whether the car has recently had its tracking or alignment done, or any steering or suspension work, or the battery disconnected. This sensor measures the steering angle against a learned straight-ahead position, and all of those wipe it. Until it is recalibrated the car thinks you are turning when you are going straight — and recalibration is a few minutes with a scan tool rather than a part. A warning lamp that appeared right after a wheel alignment is this far more often than it is a fault.

If horn, steering wheel buttons or the airbag warning have also misbehaved, mention that too — they share the coiled cable that carries signals across the steering column, and one failure explains all of them.

Ce que signifie ce code

The steering angle sensor module has stopped being heard from. The general reasoning is at U0100.

Every other input to stability control measures what the car is doing. This one measures what the driver asked for, and the gap between the two is the entire basis on which the system acts. Without it there is nothing to compare against, so stability control disables itself.

The reason this code is worth reading carefully is that its commonest neighbour is not a fault at all.

A steering angle sensor reports angle relative to a learned straight-ahead position, and that learned zero is lost or invalidated by a great many ordinary jobs: a wheel alignment, a steering rack, a track rod end, a suspension strut, a steering column or clockspring, and on many vehicles simply disconnecting the battery. After any of those the sensor must be recalibrated, and until it is, the car believes it is being steered when it is going straight.

So a stability control or anti-lock warning that appeared immediately after having the tracking done is very often an uncalibrated steering angle sensor rather than a failure — and it is a scan tool procedure taking a few minutes, not a part. That is the same shape as the throttle relearn at P2176 and the transmission adaptations at P0949: not a broken component, an unfinished procedure read as one.

The genuine lost-communication causes are the family's usual ones, with one addition worth naming: the clockspring, the coiled flat cable that carries signals across the rotating steering column. It is a wearing part, it also carries the airbag and steering wheel controls, and when it fails those go together.

Causes probables

Commencez ici

Moins fréquent

Symptômes

Composants concernés

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0126.