Skip to content

Exhaust Back Pressure Sensor

Measures pressure in the exhaust, and on a diesel is how the module knows how full the particulate filter has become — accumulating soot raises back pressure, and that differential is what triggers regeneration. A sensor the module cannot trust means regeneration is never scheduled properly: either it does not run and the filter blocks, or it runs constantly and dilutes the engine oil with unburnt fuel. Its small sensing lines run through exhaust heat and soot and block long before the sensor itself fails, so they are the first thing to check.

Also known as: exhaust pressure sensor, back pressure sensor, dpf pressure sensor, ebp sensor, differential pressure sensor dpf

Referenced by 15 codes

WhatsApp Telegram X Email

Codes involving this component (15)

Other components in Exhaust and Emissions

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this component

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Exhaust Back Pressure Sensor.