P0DE4: Motor der Getriebeölpumpe A — Übertemperatur
Was zu tun ist
You may notice the engine no longer switches off at junctions, and fuel consumption rising. Have the transmission fluid level and condition checked first — that is the commonest cause and the cheapest. Do not ignore it; running a gearbox on low pressure damages it.
Was dieser Code bedeutet
The electric transmission fluid pump's motor has exceeded its temperature limit.
The pump exists because a hybrid switches its engine off, and the whole family at P0B00 turns on that one fact. A conventional automatic gearbox is pressurised by a pump driven off the engine; stop the engine and the pressure disappears along with it. A hybrid that stops its engine at every set of lights therefore needs an electric pump to hold pressure while the engine is not running — and that is why a fault here is invisible on a road test with the engine going.
Over temperature specifically points at the pump working harder than it should, which has three ordinary causes worth separating. The fluid may be low or degraded, so the pump moves less of it and what it moves carries away less heat. The pump may be failing mechanically, with worn bearings raising the current it draws. Or it is being asked to run far more than it was designed to — a leak inside the gearbox that it is quietly compensating for, which is the P0B0C pattern and the one where replacing the pump fixes nothing.
A pump that overheats will be shut down to protect itself, and on a hybrid that means the engine has to keep running to maintain gearbox pressure, so the visible symptom is a car that has stopped switching its engine off.
Wahrscheinliche Ursachen
Hier anfangen
- Getriebeöl zu wenig oder verbraucht · mittel
- Zusatzpumpe für Getriebeöl defekt · Fachwerkstatt
Seltener
- Abrieb im Getriebeöl · mittel
- Korrodierter oder loser Stecker · Fachwerkstatt
- Kabelbaum beschädigt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0DE4.