U0015: Bus de communication CAN vitesse moyenne — (−) ouvert
Que faire
The car will almost certainly drive normally. A group of electrical fittings will have stopped working together.
Do U0012's free check first: open and close each door and the tailgate slowly, and watch whether anything changes. If it does, the break is in the rubber concertina between that door and the body, and it is a small repair.
One thing worth knowing about where this fault usually is. This network reaches every door, the tailgate, the seats, the roof and the boot — and each of those is a separate assembly with a plug where the wiring crosses into it. Those plugs are where breaks happen, because that is where the wiring gets disturbed by trim removal, seat movement, hinges and water.
So mention anything that has had trim off: seats out, carpets lifted, a boot liner fitted, speakers or a stereo installed, sill trims removed.
And ask for the second wire to be checked wherever a break is found. The two run twisted together, so whatever damaged one was touching the other.
Check your lights and indicators before driving at night.
Ce que signifie ce code
The negative line of the medium speed data bus is open circuit. See U0003 for what an open does to a differential pair, U0006 for why the partner conductor must be inspected too, and U0012 for the door harness boot that causes most of these.
One point belongs here because this bus reaches more separate assemblies than any other on the vehicle: the break is more likely to be at a connector than in the middle of a wire.
A high speed bus links a handful of modules along a short backbone. This one reaches every door, the tailgate, the seats, the roof and the boot — and each of those is a separate assembly with its own connector where the loom crosses from the body into it.
Those crossings are where the breaks are, because they are where the harness is disturbed by trim removal, by seat travel, by door hinges and by water.
So the search is a list of joints rather than a length of wire, and that is quicker: unplug, inspect, reseat, re-test at each crossing, rather than tracing a conductor end to end.
Causes probables
Commencez ici
- Connecteur corrodé ou mal enclenché · facile
- Fil rompu dans le passe-câble de porte · modérée
- Câblage du bus de données endommagé · modérée
- Faisceau de câblage endommagé · modérée
Moins fréquent
- Infiltration d'eau dans le connecteur · modérée
- Résistance de terminaison de bus hors service · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0015.