U0212: Communicatieverlies met de regelmodule stuurkolom
Wat te doen
The most important practical point: on many vehicles this module is involved in releasing the electric steering lock, so the car may run now and refuse to start next time. If that applies to yours, do not park it somewhere awkward — get it looked at while it is still going.
Expect some combination of indicators, wipers, horn and steering wheel controls not working, and expect the stability control light to be on. Take that light seriously: stability control and any lane keeping or parking assistance will be unavailable, so the car will not intervene the way you are used to. Indicators or wipers not working also make the vehicle unroadworthy, so it should not be driven far like that.
Two things worth reporting. Does anything change as you turn the wheel? That points at the clockspring — the coiled ribbon cable that carries every circuit into the steering wheel, which is a known wear item and classically takes the horn and wheel buttons with it. And has any work been done involving the airbag, steering wheel or column? Those connectors are hidden behind the wheel and easily left unmated.
Wat deze code betekent
The steering column control module has stopped being heard from. See U0200 for the block's framing.
This is the most consequential code in the block, and the reason is that the steering column is where several unrelated critical systems happen to meet. The module at the top of the column typically handles or relays the stalk switches, the horn, the steering wheel controls, the steering angle sensor's signal, and — on many vehicles — the electric steering column lock and part of the immobiliser chain.
Three consequences follow, in ascending order of seriousness.
Convenience functions stop: indicators, wipers, lights and wheel controls may become unresponsive or behave oddly. Annoying rather than dangerous, though indicators and wipers not working is a roadworthiness matter, not merely an inconvenience.
Stability control and driver assistance drop out. The steering angle sensor's signal reaches the rest of the vehicle through this area, and stability control cannot function without knowing where the wheels are pointed. Expect the stability control light on, and expect lane keeping and parking assistance to be unavailable — so the car handles as a car without those systems, which is what matters to know before relying on them.
And on vehicles with an electric column lock, the vehicle may not restart. The lock has to be commanded to release, and a module that cannot be heard cannot receive that command. A car that is running now but may not start again is the practical risk here, which is why this code is worth acting on before parking somewhere inconvenient rather than after.
The clockspring is the first physical suspect and the corpus already carries it. Every circuit reaching the steering wheel passes through a flat ribbon cable coiled inside a cassette so it can rotate — and that ribbon is a consumable that eventually cracks. A fault that changes with steering wheel position is a clockspring until proven otherwise, and the same failure classically takes the horn and the wheel controls with it.
The other genuine cause is prior work: airbags, clocksprings, columns and steering wheels are all removed for other repairs, and a connector left unmated behind a steering wheel is invisible.
Waarschijnlijke oorzaken
Begin hier
- Wikkelveer in de stuurkolom defect · gemiddeld
- Beschadigde bedrading in de stuurkolom · gemiddeld
- Gecorrodeerde of losse stekker · eenvoudig
- Sensorstekker losgeraakt · eenvoudig
Minder vaak
- Voeding of massa naar de module uitgevallen · gemiddeld
- Bedrading van de databus beschadigd · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over U0212.