Skip to content

Vehicle and Chassis Sensors

Signals that describe the vehicle rather than the engine: road speed, ambient conditions, and the wheel-speed data that misfire detection borrows to tell a rough road from a genuine misfire.

63 codes · 8 components · 2 live parameters

WhatsApp Telegram X Email

Components

Live parameters to watch

PID Parameter Unit Conversion
01:0D Vehicle speed Road speed as the module sees it. Compare with an independent reference: incorrect wheel or tyre sizes shift this calibration and can produce plausible but wrong readings with no component fault. km/h A
01:46 Ambient air temperature Outside air temperature. Compare against intake air temperature at a cold start — they should agree closely, and a persistent offset identifies which of the two has drifted. °C A − 40

Trouble codes

Moderate 32

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this system

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Vehicle and Chassis Sensors.