P0505: Leerlaufluftregelsystem
Was zu tun ist
Usually driveable. Expect a high, low, hunting or unstable idle, and possibly stalling as you come to a stop. Before agreeing to a new idle valve or a throttle body clean, ask whether the engine was checked for vacuum leaks — the idle control is very often compensating for one rather than failing itself.
Was dieser Code bedeutet
The module cannot hold the idle speed it wants. On older engines a dedicated idle air control valve bypasses the closed throttle plate with a metered amount of air; on later drive-by-wire engines the throttle body itself opens fractionally instead, and there is no separate valve at all.
This is a commonly misdiagnosed code, and the misdiagnosis has a specific shape. The instinct is to clean or replace the idle valve, because that is the part the code names. But the idle control system is the thing compensating, not the thing failing — an unmetered air leak means the engine already receives more air than commanded, so the module closes the idle valve as far as it will go and still cannot bring the speed down. The code reports that it ran out of authority, not that the valve broke.
So the useful first question is which direction the control has run out in, and P0506 and P0507 answer it directly. Where only P0505 is stored, read the idle air control position or throttle angle at warm idle: pinned fully closed points at a leak, and pinned fully open points at a restriction, a binding throttle plate, or a genuine mechanical fault. Cleaning the throttle body on an engine with a split intake hose achieves nothing except a few days of delay.
Wahrscheinliche Ursachen
Hier anfangen
- Falschluft am Ansaugkrümmer oder an den Schläuchen · mittel
- Verrußtes Leerlaufregelventil · einfach
- Rußablagerungen im Drosselklappenstutzen · einfach
- Leerlaufregelventil defekt · mittel
Seltener
- Defektes PCV-Ventil oder -Schlauch · einfach
- Gerissener oder abgerutschter Ansaugschlauch · einfach
- Klemmende Drosselklappe oder Gestänge · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0505.