P0C42: Kühlmitteltemperatursensor A des Batteriepakets — Stromkreis
Was zu tun ist
This measures the coolant, not the battery — worth stating because the two get confused and they lead to different repairs. The useful comparison is coolant temperature against cell temperature: cold coolant with hot cells means the coolant has stopped moving, which is a pump or an airlock rather than a battery fault.
Was dieser Code bedeutet
The sensor measuring the temperature of the coolant flowing through the battery pack has a circuit fault.
This is not one of the battery temperature sensors, and the difference is the most useful thing on this page. Sensors A to P measure the cells. This measures the coolant. They answer different questions: how hot is the battery, and is the cooling actually working.
The diagnosis lives in the gap between the two. A pack under load should show coolant leaving warmer than it arrived, and cells a little warmer than the coolant around them. Cold coolant beside hot cells means flow has stopped — a pump not running, a valve shut, an airlock — and no amount of the cell sensors reading correctly will tell you that on their own. Coolant as hot as the cells means flow is fine and the heat has nowhere to go, which points at the radiator or the outside air rather than at the pack.
So this sensor's value is comparative, and losing it removes a discriminator rather than a reading.
Note that a pack with this code is liquid-cooled: on an air-cooled pack these codes do not exist, which is worth confirming before hunting for a coolant circuit that was never fitted.
Wahrscheinliche Ursachen
Hier anfangen
- Defekter Kühlmitteltemperatursensor · mittel
- Korrodierter oder loser Stecker · einfach
Seltener
- Niedriger Kühlmittelstand · einfach
- Kühlmittel im Sensorstecker · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0C42.