U0041: Kommunikationsbus des Fahrzeugs B — (+) hoch
Was zu tun ist
This is one of the faults that can damage things rather than just stopping them. Battery voltage has got onto a network wire connected to every computer on that network. Be prepared for a repair in two stages, as at U0005.
One thing is worth raising immediately: has anything been connected to the car's network after it was built? A tracker, insurance box, dashcam, fleet device, alarm or aftermarket stereo.
Those installations are the likeliest cause of this particular fault, and the reason is physical. An added device needs a power feed as well as a data connection, and the two get run together — often in the same sleeve and the same plug. So the live wire and the network wires end up lying against each other for the whole of that run, which is exactly the condition needed for this fault. And a home-made loom rarely has the separation and protection a factory one does.
Say what has been fitted, including by a previous owner, and ask for it to be unplugged and the car re-tested. That is quicker than any measurement.
And ask for the car's network map to be read before the repair, so there is a record of which computers were exposed.
Was dieser Code bedeutet
The positive line of vehicle communication bus B is being held high. Everything at U0032 applies, including the module-damage warning from U0005 and the argument for establishing the vehicle's topology before the repair rather than after.
One addition belongs here because it follows U0037: a network with an added device is more exposed to this fault than one without.
An accessory connected to the bus needs a power feed as well as a data connection, and those two are run together — often in the same sleeve, often terminated in the same connector block. So the live and the bus pair are physically adjacent for the whole of that run, which is the condition this fault requires.
And the installation is rarely the manufacturer's, so the separation, sleeving and strain relief that keep power away from data in a factory loom are frequently absent.
So on a vehicle with anything spliced onto the network, that installation is the first place to look rather than the last — and unplugging it is quicker than any measurement.
Wahrscheinliche Ursachen
Hier anfangen
Seltener
- Kabelbaum beschädigt · mittel
- Masseverbindung korrodiert · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0041.