U0043: Kommunikationsbus des Fahrzeugs B — (−) niedrig
Was zu tun ist
Expect a group of systems to have stopped working together.
The fault is either a wire shorted to the bodywork, or a computer holding the network down by itself — see U0040.
One thing is worth understanding about the order in which those get investigated, because it protects you.
Finding a computer that is holding the network down means unplugging them one at a time until it recovers. That is the standard method — but on a modern car several computers need re-initialising after being disconnected. A steering angle sensor has to be re-zeroed, window motors re-taught their limits, and so on.
So the wiring should be eliminated thoroughly first, and disconnection started only after that. A workshop that starts by unplugging things on a well-equipped car can create a second set of faults while looking for the first, and those are real work to put right.
Which is why the free checks come first: unplug anything fitted to the car, move the loom by hand, inspect the connectors. Say what has been fitted and whether the fault came and went before becoming permanent.
Was dieser Code bedeutet
The negative line of vehicle communication bus B is being held low. See U0007 for the voltage signature, U0034 for the silence-versus-short trap, and U0040 for why a failed module can hold a line down exactly as a damaged wire does.
One note belongs here and it concerns the order of that work.
Disconnecting modules one at a time to find the one holding a bus down is the standard method, and on a modern vehicle it is not free. Several modules must be reprogrammed, re-coded or re-initialised after being disconnected — a steering angle sensor re-zeroed, a window motor re-taught its limits, a restraints module woken correctly.
So the sequence matters: eliminate the wiring first, thoroughly, and only then start unplugging. A workshop that begins with disconnection on a well-equipped vehicle can create a second set of faults while looking for the first, and those are real work rather than an inconvenience.
Which is an argument for the free checks coming first: anything fitted to the vehicle unplugged, the loom moved by hand, connectors inspected at the crossings.
Wahrscheinliche Ursachen
Hier anfangen
- Leitung mit Masse kurzgeschlossen · mittel
- Ein anderes Steuergerät zieht den Bus auf Masse · Fachwerkstatt
- Datenbusleitungen beschädigt · mittel
- Schlechte Leitungsverbindung in einem nachträglichen Einbau · mittel
Seltener
- Kabelbaum beschädigt · mittel
- Wasser in den Stecker eingedrungen · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0043.