U0113: Kommunikationsverlust mit den emissionsrelevanten Steuerinformationen
Was zu tun ist
The car will drive normally, which is the difficulty with this one.
What has been lost is the vehicle's ability to demonstrate that its emissions equipment is working. Two things follow. It will not pass an emissions test — not because it is polluting, but because its self-checks cannot complete, which is a different thing and a confusing one to be told. And on a diesel with an inducement system, the vehicle may begin a countdown that ends in a restricted speed and eventually a refusal to restart. That countdown runs while the car drives perfectly, so there is nothing to prompt you.
Get it read properly. Whatever other communication codes are stored alongside this one identify the module that actually stopped talking — this code on its own says only that something in the emissions chain is missing, so it is the accompanying codes that matter.
Was dieser Code bedeutet
Information the vehicle needs in order to run and verify its emissions systems has stopped arriving.
This code is unusual in the family because it names a class of information rather than a box, and that is deliberate. Emissions compliance on a modern vehicle is distributed: the reductant dosing module, the particulate filter's own controller, the exhaust temperature and NOx sensor modules and the engine module all hold pieces of it, and the standard needed a way to say that the set has become incomplete without naming which member is missing.
The consequence is legal rather than mechanical, and it follows the pattern the corpus has recorded since P2047. The vehicle can no longer demonstrate that its emissions systems are working, so it does what it does when it cannot: readiness monitors will not complete, and on a vehicle with inducement the countdown to a speed restriction and then a refusal to restart begins. None of that produces a symptom while it is happening. The car drives normally and the deadline runs anyway.
So the practical reading is: nothing feels wrong, nothing is being damaged, and there is a clock running. Which is precisely the situation people leave alone.
Diagnostically, this code is a pointer rather than an answer. Whatever other communication codes are stored alongside it name the module that actually went quiet, and that is where the work is.
Wahrscheinliche Ursachen
Hier anfangen
- Ein anderes Steuergerät zieht den Bus auf Masse · Fachwerkstatt
- Datenbusleitungen beschädigt · mittel
- Korrodierter oder loser Stecker · einfach
- Versorgung oder Masse des Steuergeräts ausgefallen · mittel
Seltener
- Softwarekalibrierung veraltet · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0113.