U0061: Kommunikationsbus des Fahrzeugs D — (−) niedrig
Was zu tun ist
As at U0058: if the car drives perfectly and keeps going flat when it stands, this is very likely why, and it is one problem rather than two.
Ask for the drain to be measured while the car is parked and settling rather than during a road test — the fault is often absent while the engine is running, which is exactly why it gets missed.
And one more specific request that costs nothing: ask them to read the conditions stored with the fault, not just the fault.
Most computers record what was happening at the moment they logged a problem — the battery voltage, how long since the car woke up, sometimes the temperature. On a fault that comes and goes, that record is often the only evidence there is.
A fault always logged at low battery voltage points at the battery or charging rather than the wiring. One logged just after the car goes to sleep points somewhere else again.
All of that is destroyed the moment somebody clears the codes — so ask for it to be read before anything is reset.
Was dieser Code bedeutet
The negative line of vehicle communication bus D is being held low. Everything at U0058 applies — including that this fault reliably flattens a battery, that it often clears while the vehicle is running, and that the measurement therefore belongs to a parked vehicle rather than a road test.
One addition specific to a fault that comes and goes with standing: the freeze frame.
Most modules record conditions at the moment a fault is stored — voltage, time since the network last woke, sometimes ambient temperature. On an intermittent bus fault that record is often the only evidence there is, because the fault is absent by the time anybody looks.
So a specific and reasonable request: read the stored conditions rather than only the code. A fault consistently stored at low system voltage points at the battery or the charging system rather than the wiring — U0100's list includes low voltage for exactly this reason — while one stored shortly after sleep points at the transition case at U0056, and one stored at a consistent temperature points at damp or thermal movement.
None of that requires an extra visit, and all of it is thrown away when a code is read and cleared.
Wahrscheinliche Ursachen
Hier anfangen
- Wasser in den Stecker eingedrungen · mittel
- Leitung mit Masse kurzgeschlossen · mittel
- Ein anderes Steuergerät zieht den Bus auf Masse · Fachwerkstatt
- Zu niedrige Systemspannung · mittel
Seltener
- Datenbusleitungen beschädigt · mittel
- Zeitweiliger Fehler in der Verkabelung · mittel
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0061.