U0105: Kommunikationsverlust mit dem Steuergerät der Einspritzventile
Nicht weiterfahren
Expect the engine not to start, or to have cut out.
The important thing to say is that this is not a fuel supply problem, however much it looks like one. The fuel pump, filter, rail pressure and injectors can all be perfect — the module that actually fires the injectors has stopped receiving instructions. Money spent on a pump, filter or injectors on the strength of this would be wasted.
Ask for the module's power supply, its earth, its mounting and its connectors to be checked. These modules are often bolted to metal deliberately so that the mounting carries heat away as well as forming the earth, so a corroded mounting causes both problems at once.
Was dieser Code bedeutet
The fuel injector control module has stopped being heard from. The general reasoning is at U0100.
A separate injector driver module exists where the injectors need more than an ordinary output stage can provide — piezo injectors on common-rail diesels, which need high voltage to change shape, and hydraulically actuated systems where the driver electronics sit apart from the main module. Losing communication with it means the engine module can still decide how much fuel to deliver and has no way to make it happen.
The result is a no-start or a stall, on an engine with nothing wrong with it and a fuel system that tests perfectly. Rail pressure is correct, the pump is fine, the injectors are fine — and nothing fires, because the instruction is not arriving. That is the same misleading picture P2552 and P2623 produce by other routes, and it sends people to the fuel system for the same reason.
These modules run hot and are often mounted where they get vibration, so their connectors and mountings matter. On several designs the module is bolted to the engine or the inner wing specifically as a heatsink, and a corroded mounting is both an earth fault and a cooling problem at once.
Wahrscheinliche Ursachen
Hier anfangen
- Versorgung oder Masse des Steuergeräts ausgefallen · mittel
- Korrodierter oder loser Stecker · einfach
- Datenbusleitungen beschädigt · mittel
- Masseverbindung korrodiert · einfach
Seltener
- Sicherung durchgebrannt oder Versorgung ausgefallen · einfach
- Steuergerät der Einspritzventile defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu U0105.