Skip to content

Four Wheel Drive Switch

Selects between two- and four-wheel drive, and reports that selection to the transmission, the engine module and stability control. Its failure direction matters more than the failure: stuck in two-wheel drive costs traction and damages nothing, while a part-time system stuck in four-wheel drive on dry tarmac winds the driveline up against itself — there is no centre differential to absorb the difference in distance the axles travel through a corner, and on a grippy surface the tyres cannot slip to release it. The energy goes into the transfer case, propshafts and differentials instead.

Also known as: 4wd switch, 4x4 switch, transfer case switch, awd switch, drive mode switch, 4wd selector

Referenced by 14 codes

WhatsApp Telegram X Email

Codes involving this component (14)

Other components in Transmission

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this component

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Four Wheel Drive Switch.