Skip to content

Transmission Range Sensor

Reports which position the gear selector is in — park, reverse, neutral, drive — to the transmission module, the starter interlock, the reverse lights and the selector display. Because so many unrelated things read the same switch, its failure produces a distinctive cluster: the engine cranks in neutral but not park, the reverse lights stop working, the display shows the wrong gear, and shifts turn harsh. On many gearboxes it is externally mounted and deliberately adjustable so its electrical centre can be aligned to the mechanical detents, which means a slipped sensor or a stretched linkage produces a fault code with no component failure at all.

Also known as: prndl switch, range sensor, neutral safety switch, inhibitor switch, manual lever position sensor, mlps, trs, park neutral switch

Referenced by 58 codes

WhatsApp Telegram X Email

Codes involving this component (58)

Other components in Transmission

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this component

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Transmission Range Sensor.