Skip to content

Transmission Fluid Filter

Catches wear debris before it reaches the valve body and solenoids, where a particle in a spool valve bore does real damage. Usually inside the pan, so changing it means dropping the pan — which is also the moment to look at what has collected there. Fine grey paste is normal wear; glittering metal flakes or friction material means the transmission is coming apart internally, and that observation costs nothing while the pan is already off. A restricted filter starves the pump and causes pressure faults that read as solenoid or clutch problems.

Also known as: transmission filter, atf filter, gearbox filter, trans filter, sump filter

Referenced by 19 codes

WhatsApp Telegram X Email

Codes involving this component (19)

Other components in Transmission

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this component

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Transmission Fluid Filter.