Skip to content

Clutch Actuator

Operates the clutch under module control on an automated manual or dual-clutch transmission, replacing the driver's left foot. Electric or hydraulic depending on design, and in either case it works against a strong spring many times a minute in traffic, which is why it wears in a way no clutch pedal ever does. Its failures divide usefully: not moving at all is obvious, while not achieving full travel is not — the latter produces slip on a clutch with plenty of material left, and is worth eliminating before a clutch is condemned.

Also known as: clutch actuator motor, clutch slave, concentric slave cylinder, csc, clutch servo, e-clutch actuator

Referenced by 89 codes

WhatsApp Telegram X Email

Codes involving this component (89)

Other components in Transmission

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this component

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Clutch Actuator.