Saltar al contenido

El contenido de referencia se muestra en inglés mientras se escribe su traducción.

Belt CVT (continuously variable)

CVT · 1958–present

WhatsApp Telegram X Correo electrónico

También conocido como: cvt, belt cvt, push-belt, variomatic, continuously variable transmission

The architecture, for the cars whose specification says only CVT and names no unit. The maker-specific pages in this catalogue — Jatco's, Aisin's, Subaru's, Toyota's — carry the part numbers; this one carries what they all share.

A belt CVT has two variable-width pulleys and a steel push-belt between them, and the ratio changes because the pulleys close and open. The whole drive depends on hydraulic pressure clamping those pulleys onto the belt — there is no clutch pack holding a gear, no synchro, and nothing mechanical that stays engaged on its own.

That single fact orders every symptom. The failure sequence is the same on every belt CVT ever built:

  1. Aged fluid loses clamping pressure before it loses anything else. Felt as a slip under acceleration — the engine rises and the car does not — most obviously uphill or overtaking.
  2. The pulley faces glaze where the belt has been slipping against them.
  3. The belt marks them permanently, and at that point the unit is replaced rather than repaired.

The first stage is a fluid service and the last is a new transmission, which is why CVT fluid intervals are real in a way that a torque-converter automatic's are not. The fluid is not a generic ATF and is not interchangeable between makers — Nissan's NS-2/NS-3, Toyota's CVT-FE, Subaru's CVTF, Honda's HCF-2 are different fluids for different clamping systems.

A shudder at light throttle at a steady speed is usually the torque converter's lock-up clutch, not the belt — most CVTs have one — and that distinction is worth making before anything expensive is contemplated.

Towing, sustained hills and stop-start traffic age the fluid far faster than the odometer suggests.

Three different things are called a CVT in a specification and only one of them is this. A hybrid e-CVT is a planetary power split with two motors and no belt at all; an electric car's single-speed reduction is a fixed gear with no ratio to vary. Neither can have any of the faults above, and both have their own pages here.

Coches con esta caja de cambios

190 generaciones. Solo cuando una fuente nombra juntos el modelo y la generación: una caja se documenta como producto mucho más a menudo que como equipamiento, así que esta lista es deliberadamente más corta que la realidad.

Mazda

Volkswagen

Información, no instrucciones

CarGeek es una obra de referencia, no un manual de taller. Sus páginas se escriben a partir de fuentes públicas y de lo que otras personas han comprobado, nunca a partir de la documentación de servicio del fabricante, de modo que pueden ser incorrectas o incompletas para su vehículo concreto. Parte de lo que describen entraña un riesgo real: alta tensión, combustible a presión, energía acumulada y piezas calientes o en movimiento.

Antes de actuar sobre cualquier indicación, hágala verificar por una persona con formación técnica siguiendo el procedimiento propio del fabricante para su vehículo. Nada de lo que hay aquí sustituye ese procedimiento.

Experiencia de la comunidad

Sé el primero en documentarlo

Todavía no se ha publicado nada sobre esto. Todo lo que haya encontrado vale la pena anotarlo — incluso un callejón sin salida le ahorra a alguien esa misma tarde.

Lo que hace que valga la pena leerlo:

  • El coche — marca, modelo, año y motor. La misma avería se comporta distinto en cada uno.
  • Lo que mediste, no solo lo que cambiaste.
  • Qué lo solucionó de verdad — o que nada lo hizo, que también conviene saber.

Iniciar sesión o crear una cuenta para agregar lo que encontró sobre Belt CVT (continuously variable).