Aller au contenu

Le contenu de référence est affiché en anglais pendant que sa traduction s'écrit.

Belt CVT (continuously variable)

CVT · 1958–present

WhatsApp Telegram X E-mail

Également appelé: cvt, belt cvt, push-belt, variomatic, continuously variable transmission

The architecture, for the cars whose specification says only CVT and names no unit. The maker-specific pages in this catalogue — Jatco's, Aisin's, Subaru's, Toyota's — carry the part numbers; this one carries what they all share.

A belt CVT has two variable-width pulleys and a steel push-belt between them, and the ratio changes because the pulleys close and open. The whole drive depends on hydraulic pressure clamping those pulleys onto the belt — there is no clutch pack holding a gear, no synchro, and nothing mechanical that stays engaged on its own.

That single fact orders every symptom. The failure sequence is the same on every belt CVT ever built:

  1. Aged fluid loses clamping pressure before it loses anything else. Felt as a slip under acceleration — the engine rises and the car does not — most obviously uphill or overtaking.
  2. The pulley faces glaze where the belt has been slipping against them.
  3. The belt marks them permanently, and at that point the unit is replaced rather than repaired.

The first stage is a fluid service and the last is a new transmission, which is why CVT fluid intervals are real in a way that a torque-converter automatic's are not. The fluid is not a generic ATF and is not interchangeable between makers — Nissan's NS-2/NS-3, Toyota's CVT-FE, Subaru's CVTF, Honda's HCF-2 are different fluids for different clamping systems.

A shudder at light throttle at a steady speed is usually the torque converter's lock-up clutch, not the belt — most CVTs have one — and that distinction is worth making before anything expensive is contemplated.

Towing, sustained hills and stop-start traffic age the fluid far faster than the odometer suggests.

Three different things are called a CVT in a specification and only one of them is this. A hybrid e-CVT is a planetary power split with two motors and no belt at all; an electric car's single-speed reduction is a fixed gear with no ratio to vary. Neither can have any of the faults above, and both have their own pages here.

Voitures équipées de cette boîte

190 générations. Uniquement lorsqu'une source nomme ensemble le modèle et la génération — une boîte est documentée comme produit bien plus souvent que comme équipement, donc cette liste est volontairement plus courte que la réalité.

Mazda

Volkswagen

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de Belt CVT (continuously variable).